RAAC Scanning in Thatcham
RAAC scanning is how you find out what a roof or floor is made of without cutting into it. From below, RAAC and dense concrete look the same; a scan tells them apart and shows where the reinforcement inside a RAAC plank actually sits. In Thatcham and across Berkshire that scanning is carried out by Neil Smuts (MCIOB, MInstNDT, FRCSP), President of the UK Concrete Scanning Standard and a Fellow of the Register of Concrete Scanning Professionals.
- Led by Neil Smuts, President of the UK Concrete Scanning Standard and Fellow of the Register of Concrete Scanning Professionals
- Confirms RAAC and locates its reinforcement without opening up the structure
- Building stays in use; quiet, room-by-room work
- Results feed straight to a chartered RAAC engineer, John Staves CEng FIStructE MIoD
Based in Finchampstead, Wokingham. Thatcham is local to us.
Why scan rather than look
RAAC scanning is non-destructive testing applied to a specific problem: confirming whether a roof, floor or wall panel in Thatcham is reinforced autoclaved aerated concrete, and if so, where the reinforcement inside it lies. Reinforcement position and bearing length are the two things that decide how a RAAC plank behaves, and both are invisible without scanning. We record them panel by panel with a condition survey, so that the engineer assessing the building works from measurement rather than assumption.
Scanning led by the national standard
Our scanning is led by Neil Smuts (MCIOB, MInstNDT, FRCSP), President of the UK Concrete Scanning Standard and a Fellow of the Register of Concrete Scanning Professionals. The UK Concrete Scanning Standard is the national standard for concrete scanning, and Neil leads it. That matters because scanning is only as good as the person interpreting it: RAAC, voids, dense concrete and previous repairs can all look alike to an untrained operator. Every scan we carry out in Thatcham is read by the person who owns the Assess stage of our RAACSafe™ Protocol, and the results go directly to John Staves (CEng FIStructE, MIoD), a chartered structural engineer and one of the UK's leading specialists in RAAC, for assessment.
RAAC testing without opening up: what scanning replaces in Thatcham
Before scanning, confirming RAAC meant cutting an opening or taking a core. Neither is needed now. Non-destructive scanning identifies the material, locates the reinforcement and checks bearings from the surface, so a school, clinic, hall or office in Thatcham is surveyed with nothing removed and nobody moved out. Where an engineer later needs load or deflection data, that is added as part of the engineering inspection rather than by damaging the roof. Scanning comes with the visual survey, from £395, and with every engineering inspection.
RAAC in Thatcham
We know Thatcham well: it is a town on the Kennet with large industrial estates at Colthrop and a big post-war housing stock, with post-war schools and community buildings that grew with the housing, and the industrial buildings at Colthrop, and around 25,500 residents under West Berkshire Council. Ask the RAAC scanning question of any flat-roofed building here that predates the mid 1990s, because that is where RAAC planks were used.
RAAC scanning: how to get started in Thatcham
Three pieces of information get a RAAC scanning in Thatcham moving: the age of the building, the type of roof, and any drawings or previous reports you hold. With those we can say whether the building is a realistic RAAC candidate, what the visit would involve, and how long it would take. For estates spread across Thatcham, Newbury and Cold Ash, we plan the visits as one programme so that nothing is missed and nothing is surveyed twice.
What comes next
Scanning sits at the front of a chain. Scan and survey establish the facts about each panel in Thatcham; the assessment by John Staves (CEng FIStructE, MIoD), a chartered structural engineer and one of the UK's leading specialists in RAAC turns those facts into a decision; and where that decision is to strengthen rather than replace, the CFRP is designed to the scan and survey data, manufactured in the UK, installed with the building in use and monitored afterwards. Together they ensure safe, quality-controlled delivery throughout. Full RAAC surveys in Thatcham include the scan as standard. Across the RAAC tenders we cost, a bespoke CFRP scheme engineered for that exact roof frequently comes in at well below 15 per cent of the cost of full replacement. On one tender, a roof costed at around £40 million to replace was priced for strengthening at under £4 million.
What we bring to Thatcham
We have surveyed thousands of square metres of RAAC, using GSSI Flex NX and GSSI StructureScan Mini ground penetrating radar, Proceq GP8800 and GP8100 radar, the Proceq Pundit PD8050 ultrasonic tomograph, and other electromagnetic and ultrasonic NDT instruments. We can usually be on site in Berkshire within one to two days, evening, weekend and holiday visits are no problem, and the report follows within five working days of the site visit, depending on the size of the survey and the level of detail required. Professional indemnity insurance is held to a maximum of £10 million, with public and employers' liability arranged on a per-site basis.
Two named specialists, one team
Neil Smuts, MCIOB MInstNDT FRCSP
Survey, scanning and monitoring. President, UK Concrete Scanning StandardNeil leads the survey, scanning and monitoring side of every Structured Carbon project. He is President of the UK Concrete Scanning Standard, a member of the Chartered Institute of Building and the Institute of NDT, and a Fellow of the Register of Concrete Scanning Professionals. LinkedIn
John Staves, CEng FIStructE MIoD
Structural assessment and CFRP designJohn is a chartered structural engineer and one of the UK's leading specialists in RAAC. He carries out the structural assessment and designs every strengthening scheme. John received both the Regional and the National Innovation Award at the HSBC Commercial Banking and Federation of Small Businesses Small Business Growth Awards for his work on RAAC repair. LinkedIn
Thank you, we have your enquiry
One of the team will come back to you within one working day. If it is urgent, call +44 118 430 8430.
RAAC scanning FAQs
Is my roof RAAC or ordinary concrete?
From below you usually cannot tell. Scanning can, in minutes per panel: RAAC's light cellular structure and its reinforcement pattern read very differently from dense concrete. If your building in Thatcham is flat-roofed and dates from the 1950s to the mid 1990s, a scan is the quickest way to know.
What does RAAC scanning cost?
Scanning is included in the visual survey and in every engineering inspection, so it is not priced separately. As a guide, a visual RAAC survey starts from £395. A full engineering inspection of a large or complex building, a hospital for example, is priced per building once we know its size, access and the level of detail required.
Is RAAC scanning destructive?
No. The scan is carried out from the surface of the panel, usually the underside, with no cutting, coring or drilling. The building stays in use.
Can scanning tell RAAC from ordinary concrete?
Yes. RAAC has a light, cellular internal structure that reads very differently from dense reinforced concrete. That difference, plus the reinforcement pattern, is how a scan confirms the material.
Does the scan show where the reinforcement is?
Yes. Locating the reinforcement, including whether it extends to the bearings, is the main reason to scan RAAC. Bearing length is the single most important factor in how a RAAC plank behaves.
Do you scan the whole roof?
We scan every accessible panel that could be RAAC, recorded to a location plan. For a large estate in Thatcham we agree the scope with you first, but the principle is that unscanned panels are unknown panels.
Who interprets the results?
Neil Smuts (MCIOB, MInstNDT, FRCSP), President of the UK Concrete Scanning Standard and a Fellow of the Register of Concrete Scanning Professionals, leads and reads every scan. The results go to John Staves (CEng FIStructE, MIoD), a chartered structural engineer and one of the UK's leading specialists in RAAC, for structural assessment.
Also in Thatcham
RAAC survey in Thatcham
RAAC survey in Thatcham, Berkshire, by Neil Smuts MCIOB MInstNDT FRCSP, President of the UK Concrete Scanning Standard.
RAAC survey in ThatchamRAAC assessment in Thatcham
RAAC structural assessment in Thatcham, Berkshire, by John Staves CEng FIStructE MIoD, working from Neil Smuts' survey.
RAAC assessment in ThatchamRAAC scanning near Thatcham
- RAAC scanning Newbury
- RAAC scanning Reading
- RAAC scanning Slough
- RAAC scanning Bracknell
- RAAC scanning Maidenhead
- RAAC scanning Wokingham
- All Berkshire towns
Related: RAAC strengthening, RAAC remediation in Berkshire, RAAC confirmed buildings register, RAAC in schools.